KERSHAW 12-12 BRIDGE CRANE

KERSHAW 12-12 BRIDGE CRANE

Overview

Our Kershaw® Model 12-12 Bridge Crane is designed to perform bridge and open deck trestle work, the Model 12-12 Bridge Crane has maximum lifting capacity of 1200 lbs. (544 kg) at 25 ft. from center of track. Upper deck and tie grapple are capable of 360° continuous rotation. The Bridge Crane is capable of handling bridge ties, caps, stringers and other bridge components.

Technical Specs
Dimensions
Weight 23,000 lbs
Length
Width
Height
Performance

Frame: Welded construction, lower frame is structural steel and 1” (25.4 mm) thick steel plate for the slewing ring support. Upper deck is structural steel and formed deck plates. Frame covered by Five (5) Year Warranty. Oversize 46 7/8 inch diameter slewing ring rated for 80,000 ft-lb. Remote grease fittings for slewing ring and axle bearings. 8 channel 6,000 psi hydraulic swivel is accessible from the upper deck.

Engine: Caterpillar C4.4, 131 HP @ 2200 rpm Tier IV Final

Travel Speed: 20 mph

Wheels and Brakes: 16” (406 mm) cast steel wheels. External, individual composite brake shoes applied directly on the vertical centerline of wheel tread. Service brakes are air applied, spring released. Emergency/parking brakes are spring applied, air released. Optional hydraulic brakes available.

Systems

Electrical System: 24VDC negative ground, 100 amp alternator, color-coded and numbered wiring.

Hydraulic System: Hydrostatic propel system pressure compensated piston-type pump direct coupled to engine. Deck rotation by hydraulic motor through gearbox. Hydraulic oil is filtered through a 100 mesh (145 micron) suction screen and 10-micron return line filter. Manifold-type stack valves for improved serviceability. Remote oil cooler accessible from ground level with dual electric cooling fans. Electric emergency pump.

Air System: Air compressor, engine oil-lubricated, air-cooled; pressure - 100-120 psi (689-927 kPa), 15-gallon air tank.

Other Features

Cab: Large enclosed cab with 99.5 cubic foot capacity. Ergonomically designed seat. Large front windshield with an unobstructed view of boom operation through full range of motion. Hydraulic pilot-pressure bottom-ported joystick controls on operator seat with heat shields. Self-contained hydraulically driven air conditioner/heater/pressurizer unit mounted on rear wall of cab (roof mount optional). Remote-controlled boom travel lock. Rubber suspension ladder steps. No service items located on cab roof on standard machine.

Options: Basket grapple; single tie grapple; two tie grapple; timber grapple; concrete tie grapple; timber crane package; boom-mounted flail mower.

Interested in this equipment?
Request a quote

If you know the type of equipment you’re looking for, and a rough timeline of when you need it, we can start drafting a quote for you and get things moving even faster. Once you submit the form, our team will contact you to go over the details and get you the equipment you need.

    Let's Get Started

    Get in touch to request a quote, check on equipment availability, or get you moving with what you need right now.

    Contact Us >